Product Details
Made to fit the 2008-2013 Volvo C30 T5 (P1), the Adjustable Front Sway Bar Link from Whiteline. Application note: Adjustable extra heavy duty. Position: front. You receive 2 links and 8 washers. Order it as part number KLC151. The listing names the T5 trim.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. To go with it on the Volvo C30, see Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Control Arm Lower Inner Front Bushing.
Features
- Construction: Alloy construction keeps the weight down while handling the loads.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Hardware: Also in the box: locking nuts and washers.
- Pre-greased: Joints arrive pre-greased and ready to install.
- Install guide: Instructions for fitting are packed in the box.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2013 Volvo C30 T5 |
| Chassis Code | P1 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |


