Product Details
This page covers the Whiteline Adjustable Front Sway Bar Link for the 2008-2012 Ford Focus S, SE. It goes on the front of the vehicle. Chassis code: C307. The listing names the S and SE trims. Whiteline part number: KLC151. Whiteline's note for this fit: Adjustable extra heavy duty. Included: 2 links and 8 washers.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Its adjustable body lets you set the length with the car on the ground, so the bar is not twisted against its own mounts before the car even moves.
Expect a moderate job of about 1 hour. A wheel alignment is not required. Other Whiteline parts we list for the Focus: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Control Arm Lower Inner Front Bushing.
Features
- Pre-greased: Joints arrive pre-greased and ready to install.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Anodized alloy: The alloy is anodized, adding a durable protective layer.
- Install guide: An install guide comes in the box.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2012 Ford Focus S, SE |
| Chassis Code | C307 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |


