Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2008-2010 Volkswagen Passat Komfort (B6). This part is for the front of the vehicle. The kit contains 2 links. Application note: Adjustable Extra Heavy Duty. The part number is KLC167A.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Expect a moderate job of about 1 hour. No alignment is needed afterward. We also list Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front and Rear Sway Bar Kit for the Passat.
Features
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Construction: High-strength alloy gives the strength needed without much weight.
- Install guide: An install guide comes in the box.
- Hardware: The kit includes locking nuts and washers.
- Pre-greased: Comes pre-greased, so it can go straight on the car.
- Anodized alloy: The alloy carries an anodized finish for durability.
Specifications
| Part Number | KLC167A |
| Part Name | Sway Bar Link |
| Vehicle | 2008-2010 Volkswagen Passat Komfort |
| Chassis Code | B6 |
| Drivetrain | FWD |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 320-345 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 320-345mm. Bolt Diameter 12mm. |



