Product Details
For the 2007 Ford Focus S, SES, ST Base (C307), Whiteline makes the Adjustable Front Sway Bar Link. You receive 2 links and 8 washers. The part number is KLC151. The listing names the S, SES, and ST Base trims. Whiteline's note for this fit: Adjustable extra heavy duty. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. To go with it on the Focus, see Adjustable Rear Sway Bar Link, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Hardware: Also in the box: locking nuts and washers.
- Construction: High-strength alloy gives the strength needed without much weight.
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Ball joints: Heavy duty steel ball joints at the ends move through a wide arc to suit the application.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2007 Ford Focus S, SES, ST Base |
| Chassis Code | C307 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |


