Product Details
This page covers the Whiteline Adjustable Front Sway Bar Link for the 2006-2010 Volvo S40 2.4i (P1). The kit contains 2 links and 8 washers. The listing names the 2.4i trim. The part number is KLC151. Application note: Adjustable extra heavy duty. It goes on the front of the vehicle.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. A body that adjusts in length means the link can be matched to the car instead of the other way around, and the bar starts from a neutral position.
Installation is rated moderate, with about 1 hour of work listed. No alignment is needed afterward. Other Whiteline parts we list for the Volvo S40: Adjustable Rear Sway Bar Link, Adjustable Rear Upper Control Arm Set, and Front Control Arm Lower Inner Front Bushing.
Features
- Anodized alloy: An anodized coating protects the alloy from corrosion and wear.
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Construction: Made from strong, light alloy.
- Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
- Install guide: An install guide comes in the box.
- Pre-greased: Joints arrive pre-greased and ready to install.
Specifications
| Part Number | KLC151 |
| Part Name | Sway Bar Link |
| Vehicle | 2006-2010 Volvo S40 2.4i |
| Chassis Code | P1 |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Washers |
| Length | 310-335 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable extra heavy duty. Length 310-335mm. Bolt Diameter 10mm. |