Whiteline Adjustable Front Sway Bar Link for 2005-2006 Ford Focus ST ZX4, ZX4, ZXW (C170)

Product Details

The Whiteline Adjustable Front Sway Bar Link fits the 2005-2006 Ford Focus ST ZX4, ZX4, ZXW. This part is for the front of the vehicle. Order it as part number KLC151. Whiteline's note for this fit: Adjustable extra heavy duty. Included: 2 links and 8 washers. It is listed for the C170 chassis. Trims named on the listing: ZX4, ZX4, and ZXW.

A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.

Installation is rated moderate, with about 1 hour of work listed. It does not require a wheel alignment. Other Whiteline parts we list for the Focus ST: Adjustable Rear Sway Bar Link, Heavy Duty Blade Adjustable 22mm Rear Sway Bar, and Rear Control Arm Lower Rear Inner Bushing.

Features

• Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
• Preload-free setup: Length adjustment on the car lets you take preload out of the bar.
• Install guide: Step-by-step installation instructions come with it.
• Pre-greased: Joints arrive pre-greased and ready to install.
• Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
• Rigid design: A stiffer design than the factory part gives a more immediate response.

Specifications