Product Details
This Whiteline Adjustable Front Sway Bar Link fits the 2003-2005 Saturn Ion 1 (Delta). Included: 2 links. Position: front. Whiteline's note for this fit: Adjustable Extra Heavy Duty. Part number KLC175.
Links are small parts with a large effect on how a car leans in a corner. They sit between the bar and the suspension and decide how quickly and how evenly the bar's resistance reaches the tire, and this front link is built to keep that connection firm. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. We also list 12mm Adjustable Front Camber Bolts, Heavy Duty Blade Adjustable 24mm Rear Sway Bar, and Front Lower Inner Rear Control Arm Bushing Kit for the Saturn Ion.
Features
- Preload-free setup: Setting the length on the car lets the bar rest without preload.
- Ball joints: Heavy duty steel ball joint ends pivot freely through a wide range, which helps fitment.
- Construction: Alloy construction keeps the weight down while handling the loads.
- Install guide: Whiteline packs an install guide with it.
- Rigid design: Built to remove the flex found in factory parts, so inputs reach the bar sooner.
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
Specifications
| Part Number | KLC175 |
| Part Name | Sway Bar Link |
| Vehicle | 2003-2005 Saturn Ion 1 |
| Chassis Code | Delta |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 285-305 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 285-305mm. Bolt Diameter 12mm. |



