Product Details
This Whiteline Front Sway Bar Link fits the 1998 Chevrolet Corvette Indianapolis 500 Pace Car (C5). Position: front. Whiteline's note for this fit: Adjustable Extra Heavy Duty. The kit contains 2 links. Order it as part number KLC110.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Whiteline rates the install as moderate and lists about 1 hour. No alignment is needed afterward. Other Whiteline parts we list for the Corvette: Rear Sway Bar Link.
Features
- Anodized alloy: Anodized alloy parts resist corrosion and wear and look good doing it.
- Hardware: The kit includes locking nuts and washers.
- Ball joints: Steel ball joint ends are built for heavy loads and free movement.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Install guide: Instructions for fitting are packed in the box.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
Specifications
| Part Number | KLC110 |
| Part Name | Sway Bar Link |
| Vehicle | 1998 Chevrolet Corvette Indianapolis 500 Pace Car |
| Chassis Code | C5 |
| Adjustable | Yes |
| Bolt Thread Diameter | 12 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 90-115 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Washers Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 90-115mm. Bolt diameter 12mm. |

