Product Details
Made to fit the 1992-1995 Isuzu Trooper RS, the Front Sway Bar Link from Whiteline. It is listed for the UBS chassis. Application note: Adjustable Extra Heavy Duty. You receive 2 links. Trim named on the listing: RS. Whiteline part number: KLC102. Position: front.
The front sway bar can only do its job if its ends are tied firmly to the wheels, and the links make that connection. A loose or flexible link lets the body lean before the bar starts to push back, which is why worn links show up as a knock over bumps or a delayed feel at turn-in. Because the length is adjustable, the link can be set on the car so the bar sits relaxed at rest, which matters most after a change in ride height.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. To go with it on the Trooper, see Rear Sway Bar Link and Front Upper Shock Absorber Bushing Kit.
Features
- Rigid design: A stiffer design than the factory part gives a more immediate response.
- Install guide: Step-by-step installation instructions come with it.
- Pre-greased: Pre-greased at the factory so it can be fitted right away.
- Preload-free setup: The length can be set on the car to remove preload from the sway bar.
- Hardware: Also in the box: locking nuts.
- Ball joints: Steel ball joint ends handle the loads and rotate to suit the car's geometry.
Specifications
| Part Number | KLC102 |
| Part Name | Sway Bar Link |
| Vehicle | 1992-1995 Isuzu Trooper RS |
| Chassis Code | UBS |
| Adjustable | Yes |
| Bolt Thread Diameter | 10 mm |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Greaseable | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links |
| Length | 150-175 mm |
| Locking Nuts Included | Yes |
| Material | Aluminum Alloy |
| Pre-Greased | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | Adjustable Extra Heavy Duty. Length 150-175mm. Bolt Diameter 10mm. |