Product Details
This Whiteline Front Sway Bar Link fits the 1965-1973 Ford Mustang Base (Fox). The kit contains 2 links, 8 bushings, 8 washers, and 8 nuts. Placement: front. Order it as part number W21807S.
A sway bar link is the short rod that ties each end of the front sway bar to the suspension. Whenever the body leans, the link carries that motion into the bar, so any slop, flex, or wear in it is slop in the whole roll-control system.
Expect an easy job of about 1 hour. It does not require a wheel alignment. To go with it on the Mustang, see Front Sway Bar Washer Kit, Tie Rod Boot Kit, and Front Lower Control Arm Bushing Kit.
Features
- Install guide: Instructions for fitting are packed in the box.
- Rigid design: Less flex than the original parts means a quicker, more direct response, especially in lane changes and at initial turn-in.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W21807S |
| Part Name | Sway Bar Link |
| Vehicle | 1965-1973 Ford Mustang Base |
| Drivetrain | RWD |
| Chassis Code | Fox |
| Bolt Thread Diameter | 10 mm |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1 |
| Kit Contents | 2 Links, 8 Bushings, 8 Washers, 8 Nuts |
| Length | 130-160 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |



