Product Details
This Whiteline Front Strut Rod to Chassis Bushing Kit fits the 1995-1998 Nissan 200SX. Order it as part number W81707A. Included: 4 bushings, 2 tubes, and grease. Application note: Standard replacement. Position: front.
Strut rod bushings do their work quietly until they fail. Worn ones allow the arm to move forward and back, which changes alignment as the car brakes and rides over bumps. Fresh bushings hold it in place. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 2 hours. Plan on a wheel alignment afterward. Working on the same car? We also list 12mm Adjustable Front Camber Bolts, Front Sway Bar Link Bushing Kit, and Rear Differential Mount Support Rear Bushing for the 200SX.
Features
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: Instructions for fitting are packed in the box.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
Specifications
| Part Number | W81707A |
| Part Name | Strut Rod Bushings |
| Vehicle | 1995-1998 Nissan 200SX |
| Chassis Code | S14 |
| Bushing Color | Black |
| Bushing Inside Diameter | 26.5 mm |
| Bushing Length | 35 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 64 mm |
| Bushing Quantity | 4 |
| Durometer | 85 |
| Grade Type | Regular |
| Hardware Included | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Bushings, 2 Tubes, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | 64mm OD. standard replacement |