Product Details
This Whiteline Front Strut Rod to Chassis Bushing Kit fits the 1971-1983 Toyota Celica. Part number W81193. Included: 4 bushings and 2 tubes. Placement: front.
Braking pushes the wheel rearward, and that load goes through the strut rod and its bushings. Rubber that has compressed lets the control arm move more than it should, so a firmer bushing keeps the arm located under braking. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 2 hours. An alignment is required after installation. Working on the same car? We also list Front Sway Bar Washer Kit, Front Strut Tower Brace Quick Release Kit, and Rear Lower Trailing Arm Bushing for the Celica.
Features
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Install guide: Written install instructions are included with the part.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
Specifications
| Part Number | W81193 |
| Part Name | Strut Rod Bushings |
| Vehicle | 1971-1983 Toyota Celica |
| Chassis Code | A20/A30/A40/A60 |
| Bushing Color | Black |
| Bushing Inside Diameter | 19 mm |
| Bushing Length | 30 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 47.3 mm |
| Bushing Quantity | 4 |
| Durometer | 72 |
| Grade Type | Regular |
| Hardware Included | No |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Bushings, 2 Tubes |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |