Product Details

This Whiteline Caster/Camber Offset Front Strut Mount Kit fits the 1998-2003 Subaru Impreza WRX RS (GC/GF/GD/GG). In the box: 2 strut mounts. Whiteline's note for this fit: High duro rubber +0.75 degrees Caster/-0.5 degrees Camber. The part number is KCA335. It goes on the front of the vehicle.

Caster and camber are set by where the strut sits in the body. A mount with an offset hole lets you move that point, so the alignment you can reach is different from the factory setup. That is especially useful after lowering the car.

Installation is rated moderate, with about 2 hours of work listed. An alignment is required after installation. To go with it on the Impreza WRX RS, see 14mm Adjustable Front Camber Bolts, 22mm Front Sway Bar, and Front and Rear Sway Bar Kit.

Features

  • Camber adjustment: Aims to keep camber in an effective range as the body rolls.
  • Caster: Adds caster for steadier steering and better tire contact in roll.
  • Install guide: An install guide comes in the box.
  • Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
Part Number KCA335
Part Name Strut Mount
Vehicle 1998-2003 Subaru Impreza WRX RS
Drivetrain AWD
Chassis Code GC/GF/GD/GG
Installation Difficulty Moderate
Installation Time (hrs) 2
Kit Contents 2 Strut Mounts
Vehicle Placement Front
Wheel Alignment Required Yes
Notes High duro rubber +0.75 Degree Caster/-0.5Degree Camber;

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1998SubaruWRXAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
1999SubaruWRXAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2000SubaruWRXAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2001SubaruWRXAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2002SubaruWRXAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2003SubaruWRXAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;

Customer Reviews

Questions & Answers