Product Details
This Whiteline Caster/Camber Offset Front Strut Mount Kit fits the 1998-2002 Subaru Legacy GT Limited (BE/BH). Whiteline's note for this fit: High duro rubber +0.75 degrees Caster/-0.5 degrees Camber. Part number KCA335. The kit contains 2 strut mounts. This part is for the front of the vehicle.
The strut top mount fixes the upper end of the strut to the body. An offset mount moves that point slightly, which changes caster and camber without any other change to the suspension. It gives the alignment shop more range on a car whose factory settings are not adjustable.
Installation is rated moderate, with about 2 hours of work listed. An alignment is required after installation. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Legacy.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
- Caster: Caster is optimized for stable steering and good contact through roll.
- Install guide: Whiteline packs an install guide with it.
Specifications
| Part Number | KCA335 |
| Part Name | Strut Mount |
| Vehicle | 1998-2002 Subaru Legacy GT Limited |
| Drivetrain | FWD/AWD |
| Chassis Code | BE/BH |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Strut Mounts |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | High duro rubber +0.75 Degree Caster/-0.5Degree Camber; |



