Product Details

This Whiteline Caster/Camber Offset Front Strut Mount Kit fits the 1998-2002 Subaru Forester Base, L, S (SF/SG). Order it as part number KCA335. In the box: 2 strut mounts. It goes on the front of the vehicle. Application note: High duro rubber +0.75 degrees Caster/-0.5 degrees Camber.

The strut top mount fixes the upper end of the strut to the body. An offset mount moves that point slightly, which changes caster and camber without any other change to the suspension. It gives the alignment shop more range on a car whose factory settings are not adjustable.

Expect a moderate job of about 2 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Forester: 14mm Adjustable Front Camber Bolts, Adjustable Sway Bar Vehicle Link Kit, and Front and Rear Sway Bar Kit.

Features

  • Caster: Adds caster to improve turn-in and directional stability.
  • Install guide: Written install instructions are included with the part.
  • Camber adjustment: Helps hold the tire flatter on the road by correcting camber changes through roll.
  • Corrosion protection: Plated finish keeps rust off the hardware.
Specifications
Part Number KCA335
Part Name Strut Mount
Vehicle 1998-2002 Subaru Forester Base, L, S
Chassis Code SF/SG
Installation Difficulty Moderate
Installation Time (hrs) 2
Kit Contents 2 Strut Mounts
Vehicle Placement Front
Wheel Alignment Required Yes
Notes High duro rubber +0.75 Degree Caster/-0.5Degree Camber;

Vehicle fitment

This product fits the vehicles listed below.

YearMakeModelDrivetrainNotes
1998SubaruForesterAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
1999SubaruForesterAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2000SubaruForesterAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2001SubaruForesterAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;
2002SubaruForesterAWDHigh duro rubber +0.75 Degree Caster/-0.5Degree Camber;

Customer Reviews

Questions & Answers