Product Details
This page covers the Whiteline Front Shock Absorber To Control Arm Bushing for the 2015-2019 Nissan GT-R Nismo. Included: 2 shell bushings, 2 tubes, and grease. It is listed for the R35 chassis. Position: front. The listing names the Nismo trim. The part number is W33364.
Shock bushings take the shock's loads and let it pivot slightly as the suspension moves. If they are worn, you may hear a clunk and feel less control over bumps. Replacing them is an easy way to quiet and tighten that corner. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 2 hours. Get the car aligned once it is back on the ground. To go with it on the GT-R, see Front Sway Bar Link Kit, Front and Rear Sway Bar Kit, and Front Control Arm Lower Inner Rear Bushing.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Grease: Moly grease is supplied to prolong the life of the parts.
Specifications
| Part Number | W33364 |
| Part Name | Control Arm Bushing |
| Vehicle | 2015-2019 Nissan GT-R Nismo |
| Chassis Code | R35 |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 85 |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |