Product Details
This Whiteline Front Shock Absorber To Control Arm Bushing fits the 2009-2011 Dodge Challenger R/T, SE (LC). Chassis code: LC. Order it as part number W33333. You receive 2 shell bushings, 2 tubes, 4 washers, an install guide, and grease. Placement: front.
Shock bushings take the shock's loads and let it pivot slightly as the suspension moves. If they are worn, you may hear a clunk and feel less control over bumps. Replacing them is an easy way to quiet and tighten that corner. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 3 hours. An alignment is required after installation. We also list Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit for the Challenger.
Features
- Bonded design: The bushing is bonded for strength where loads are highest.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W33333 |
| Part Name | Control Arm Bushing |
| Vehicle | 2009-2011 Dodge Challenger R/T, SE |
| Chassis Code | LC |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 94 |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, 4 Washers, Install Guide, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




