Product Details
This Whiteline Front Shock Absorber To Control Arm Bushing fits the 2006-2010 Dodge Charger SRT8 Base (LX). In the box: 2 shell bushings, 2 tubes, 4 washers, an install guide, and grease. Whiteline part number: W33333. Position: front.
Shock bushings take the shock's loads and let it pivot slightly as the suspension moves. If they are worn, you may hear a clunk and feel less control over bumps. Replacing them is an easy way to quiet and tighten that corner. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. An alignment is required after installation. We also list Rear Subframe Mount Bushing, Front and Rear Sway Bar Kit, and Rear Trailing Arm Lower Front Bushing for the Charger SRT8.
Features
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Finish: The metal parts are powder coated for durability.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Install guide: Instructions for fitting are packed in the box.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Corrosion protection: Rust protection comes from plating on the metal parts.
Specifications
| Part Number | W33333 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2010 Dodge Charger SRT8 Base |
| Drivetrain | RWD |
| Chassis Code | LX |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 94 |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, 4 Washers, Install Guide, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |




