Product Details
This Whiteline Front Lower Radius Arm Bushing fits the 2007-2008 BMW 328xi 3 Series (E90/E91/E92/E93). Whiteline's note for this fit: Adds +/- 0.5 degrees Caster. It goes on the front of the vehicle. Whiteline part number: KCA430. Included: 2 bushings and 2 tubes.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Adjustable Front Sway Bar Link, Rear Subframe Mount Bushing, and Rear Differential Mount Bushing for the 328xi 3 Series.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Install guide: Whiteline packs an install guide with it.
- Material: Polyurethane construction.
- Caster: Caster is optimized for stable steering and good contact through roll.
Specifications
| Part Number | KCA430 |
| Part Name | Radius Arm Bushing |
| Vehicle | 2007-2008 BMW 328xi 3 Series |
| Chassis Code | E90/E91/E92/E93 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 70.7 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 70.7 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5 Deg Caster |



