Product Details
This Whiteline Front Lower Radius Arm Bushing fits the 2006 Dodge Charger Daytona R/T (LX). Drivetrain: RWD. Part number W53335. In the box: 2 shell bushings and 2 tubes. Placement: front.
Every time the wheel moves, the radius arm swings on its bushings. When they are soft or worn, the arm shifts under load, the alignment changes as the car moves, and steering and braking feel less precise. A stiffer bushing cuts that unwanted movement while still letting the arm pivot freely. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Charger: Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit.
Features
- Install guide: Written install instructions are included with the part.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bonded design: A bonded design adds strength for high load applications.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Finish: Powder coating covers the metal for protection against chips and rust.
Specifications
| Part Number | W53335 |
| Part Name | Radius Arm Bushing |
| Vehicle | 2006 Dodge Charger Daytona R/T |
| Chassis Code | LX |
| Drivetrain | RWD |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.5 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



