Product Details
This Whiteline Front Lower Radius Arm Bushing fits the 2006-2010 Dodge Charger R/T, SE, SXT (LX). Part number W53335. Included: 2 shell bushings and 2 tubes. Placement: front. It fits RWD models.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired radius arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list Rear Subframe Mount Bushing, Front Sway Bar Link Kit, and Front and Rear Sway Bar Kit for the Charger.
Features
- Install guide: Instructions for fitting are packed in the box.
- Grease: Molybdenum disulfide grease is included to help the parts last.
- Material: The part is made of polyurethane.
- Bonded design: Bonding adds durability in high-load use.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | W53335 |
| Part Name | Radius Arm Bushing |
| Vehicle | 2006-2010 Dodge Charger R/T, SE, SXT |
| Chassis Code | LX |
| Drivetrain | RWD |
| Bushing 1 Inner Diameter | 14.2 mm |
| Bushing 1 Outer Diameter | 69.7 mm |
| Bushing 2 Outer Diameter | 66.5 mm |
| Bushing Quantity | 2 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



