Product Details
This Whiteline Front Lower Radius Arm Bushing (Standard Offset) fits the 2015-2016 BMW 428i Gran Coupe 4 Series. This part is for the front of the vehicle. The kit contains 2 bushings and 2 tubes. Part number KCA430. Chassis code: F36. Whiteline's note for this fit: Adds +/- 0.5 degrees Caster.
A standard bushing only restores what the factory built. This one is designed to change the geometry, adding positive caster and changing front anti-dive behavior, in addition to resisting the deflection that soft rubber allows.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the 428i Gran Coupe 4 Series: Adjustable Rear Sway Bar Link, Rear Subframe Mount Bushing, and Front Sway Bar Link Assembly.
Features
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Install guide: An install guide comes in the box.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Material: Built from polyurethane.
Specifications
| Part Number | KCA430 |
| Part Name | Radius Arm Bushing |
| Vehicle | 2015-2016 BMW 428i Gran Coupe 4 Series |
| Chassis Code | F36 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 70.7 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 70.7 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds +/- 0.5 Deg Caster |