Product Details
This Whiteline Front Lower Inner Rearward Control Arm Bushing Kit - Double Offset fits the 2018-2025 Toyota Camry. Included: 2 shell bushings, 2 tubes, and 4 spacers. Order it as part number KCA567. This part is for the front of the vehicle.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a difficult job of about 3 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Camry: Front Sway Bar Link Kit, Adjustable Rear Lower Toe Arm Set, and Front Lower Control Arm Set.
Features
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
- Install guide: Instructions for fitting are packed in the box.
Specifications
| Part Number | KCA567 |
| Part Name | Control Arm Bushings |
| Vehicle | 2018-2025 Toyota Camry |
| Chassis Code | XV70 |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Length | 67 mm |
| Bushing 1 Outer Diameter | 72.1 mm |
| Bushing Material | Polyurethane |
| Grade Type | Performance |
| Grease Fitting Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Shell Bushings, 2 Tubes, 4 Spacers |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |