Product Details
This Whiteline Front Lower Inner Rear Control Arm Bushing Kit (KCA319A / KCA35) fits the 1993-2007 Subaru Impreza. Whiteline's note for this fit: Bushing Service Kit Only to KCA359 or KCA319A. Part number W0562. This part is for the front of the vehicle. The kit contains 2 bushings and 2 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 2 hours. An alignment is required after installation. To go with it on the Impreza, see 20mm Rear Sway Bar Mount Bushing Kit, Adjustable Sway Bar Vehicle Link Kit, and Front Sway Bar Link Bushing Kit.
Features
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Install guide: An install guide comes in the box.
- Material: Built from polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | W0562 |
| Part Name | Control Arm Bushings |
| Vehicle | 1993-2007 Subaru Impreza |
| Chassis Code | GC/GF/GD |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Outer Diameter | 42.4 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Bushing Service Kit Only to KCA359 or KCA319A |