Product Details
This Whiteline Front Lower Inner Rear Control Arm Bushing Kit (KCA319A / KCA35) fits the 1990-2004 Subaru Legacy. Order it as part number W0562. Position: front. Application note: Bushing Service Kit Only to KCA359 or KCA319A. Included: 2 bushings and 2 tubes.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a moderate job of about 2 hours. Plan on a wheel alignment afterward. To go with it on the Legacy, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- Install guide: Step-by-step installation instructions come with it.
- Material: Made from polyurethane.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | W0562 |
| Part Name | Control Arm Bushings |
| Vehicle | 1990-2004 Subaru Legacy |
| Chassis Code | BC/BF/BD/BG/BE/BH/BL/BP |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 20 mm |
| Bushing 1 Outer Diameter | 42.4 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 2 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Bushing Service Kit Only to KCA359 or KCA319A |