Product Details
This Whiteline Front Lower Inner Rear Control Arm Bushing Kit fits the 2018-2022 Hyundai Kona. This part is for the front of the vehicle. Application note: Fits Steel Front Lower Control Arms ONLY. Order it as part number W53629. You receive 2 shell bushings.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated difficult, with about 2.5 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the Kona: Adjustable Rear Upper Control Arm Set, 14mm Adjustable Front Camber Bolts, and Front Sway Bar Link Kit.
Features
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Install guide: Whiteline packs an install guide with it.
- Material: Made from polyurethane.
Specifications
| Part Number | W53629 |
| Part Name | Control Arm Bushings |
| Vehicle | 2018-2022 Hyundai Kona |
| Chassis Code | K2 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 70.3 mm |
| Bushing Quantity | 2 Shell bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Fits Steel Front Lower Control Arms ONLY |