Product Details
This Whiteline Front Lower Inner Rear Control Arm Bushing Kit (Camber Correction) fits the 2003-2009 Toyota 4Runner. You receive 2 bushings and 2 tubes. Position: front. Application note: Alignment Correction. 0.6 degrees of Camber Adjustment. Part number KCA509.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as difficult and lists about 3 hours. Plan on a wheel alignment afterward. To go with it on the 4Runner, see Front Sway Bar Link, Front Sway Bar Bushing Kit, and Front Upper Control Arm Set - Fixed Offset.
Features
- Install guide: Written install instructions are included with the part.
- Material: Polyurethane construction.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
Specifications
| Part Number | KCA509 |
| Part Name | Control Arm Bushings |
| Vehicle | 2003-2009 Toyota 4Runner |
| Chassis Code | N210 |
| Drivetrain | 4WD/RWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 56 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 3 |
| Kit Contents | 2 Bushings, 2 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Alignment Correction; 0.6 Degrees of Camber Adjustment. |

