Product Details
This Whiteline Front Lower Inner Forward Control Arm Bushing Kit fits the 2002-2006 Honda CR-V. Part number W53410. It is listed for the RD4 chassis. Application note: Standard replacement. Included: 2 shell bushings and an install guide. It goes on the front of the vehicle.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 2.5 hours. Plan on a wheel alignment afterward. To go with it on the CR-V, see Rear Sway Bar Link, 16mm Adjustable Front Camber Bolts, and Rear Control Arm Lower Rear Inner Bushing.
Features
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Material: Made from polyurethane.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing material: Polyurethane is firmer than the factory rubber, so it deflects less under load.
Specifications
| Part Number | W53410 |
| Part Name | Control Arm Bushings |
| Vehicle | 2002-2006 Honda CR-V |
| Chassis Code | RD4 |
| Drivetrain | AWD/FWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Length | 63 mm |
| Bushing 1 Outer Diameter | 65 mm |
| Bushing 2 Inner Diameter | 14.3 mm |
| Bushing 2 Length | 63 mm |
| Bushing 2 Outer Diameter | 65 mm |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Bushing Quantity | 2 |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Shell Bushings, Install Guide |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 65 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Suits 65mm OD - Standard replacement |