Product Details
This Whiteline Front Lower Inner Control Arm Bushing fits the 2011-2026 Nissan Frontier S, SL, SV. The chassis code on the listing is D41. Whiteline part number: W53272. The kit contains 4 shell bushings, 4 tubes, and 8 washers. Trims named on the listing: S, SL, and SV. It goes on the front of the vehicle. Application note: Standard Replacement.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 4 hours. An alignment is required after installation. Other Whiteline parts we list for the Frontier: Upper Control Arm Ball Joint Service Kit and Front Upper Control Arm Set - Fixed Offset.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | W53272 |
| Part Name | Control Arm Bushing |
| Vehicle | 2011-2026 Nissan Frontier S, SL, SV |
| Chassis Code | D41 |
| Drivetrain | 4WD/RWD |
| Bushing 1 Inner Diameter | 14.3 mm |
| Bushing 1 Outer Diameter | 43 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Regular |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 4 |
| Kit Contents | 4 Shell Bushings, 4 Tubes, 8 Washers |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |