Product Details
This Whiteline Front Lower Control Arm Bushing Kit (46.1mm OD) fits the 2008-2013 BMW 135i 1 Series (E82/E88). This part is for the front of the vehicle. You receive 2 bushings, 2 tubes, 2 bolts, and 2 nuts. Whiteline part number: KCA431. Whiteline's note for this fit: Adds 0.5 degrees Camber.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. We also list Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Rear Subframe Mount Bushing for the 135i 1 Series.
Features
- Install guide: Step-by-step installation instructions come with it.
- Finish: The metal parts are powder coated for durability.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Hardware: The kit includes mounting hardware.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Material: Built from polyurethane.
Specifications
| Part Number | KCA431 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2013 BMW 135i 1 Series |
| Chassis Code | E82/E88 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 46.1 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Bushings, 2 Tubes, 2 Bolts, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |

