Product Details
This Whiteline Front Lower Control Arm Bushing Kit (46.1mm OD) fits the 2006-2007 BMW 330i 3 Series (E90). You receive 2 bushings, 2 tubes, 2 bolts, and 2 nuts. Whiteline's note for this fit: Adds 0.5 degrees Camber. Whiteline part number: KCA431. It goes on the front of the vehicle.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Expect a difficult job of about 2.5 hours. An alignment is required after installation. To go with it on the 330i 3 Series, see Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front and Rear Essential Vehicle Kit.
Features
- Material: Polyurethane construction.
- Hardware: Hardware supplied: mounting hardware.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Install guide: Whiteline packs an install guide with it.
- Finish: The metal parts are powder coated for durability.
Specifications
| Part Number | KCA431 |
| Part Name | Control Arm Bushing |
| Vehicle | 2006-2007 BMW 330i 3 Series |
| Chassis Code | E90 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 46.1 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Bushings, 2 Tubes, 2 Bolts, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


