Product Details
This Whiteline Front Lower Control Arm Bushing Kit (46.1mm OD) fits the 2005-2006 BMW 325Ci 3 Series. Whiteline's note for this fit: Adds 0.5 degrees Camber. Position: front. Chassis code: E46. The part number is KCA431. You receive 2 bushings, 2 tubes, 2 bolts, and 2 nuts.
Lowering a car or fitting wider tires can push camber out of the range an alignment shop can correct with factory parts. This offset bushing moves the arm's pivot point to give the technician more to work with, while also replacing the soft rubber that was there.
Whiteline rates the install as difficult and lists about 2.5 hours. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the 325Ci 3 Series: Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Front Strut Tower Brace Quick Release Kit.
Features
- Corrosion protection: The hardware is plated to stand up to road conditions.
- Install guide: Written install instructions are included with the part.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Hardware: Also in the box: mounting hardware.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Material: The part is made of polyurethane.
Specifications
| Part Number | KCA431 |
| Part Name | Control Arm Bushing |
| Vehicle | 2005-2006 BMW 325Ci 3 Series |
| Chassis Code | E46 |
| Bushing 1 Inner Diameter | 12 mm |
| Bushing 1 Outer Diameter | 46.1 mm |
| Bushing Quantity | 2 Bushings |
| Grade Type | Performance |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2.5 |
| Kit Contents | 2 Bushings, 2 Tubes, 2 Bolts, 2 Nuts |
| Material | Polyurethane |
| Mounting Hardware Included | Yes |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |
Fitment for 325Ci control arm bushings
Fits the 2005-2006 BMW 325Ci 3 Series. Each model year is listed below.