Product Details
This Whiteline Front Leading Arm to Chassis Bushing Kit fits the 1980-1990 Ford Bronco (U15). Order it as part number W83484. In the box: 4 bushings, 2 tubes, and grease. It goes on the front of the vehicle.
A leading arm, also called a radius arm, runs forward from the axle to a mount on the frame and keeps the axle from moving fore and aft. Its bushings carry the load of braking and acceleration, so soft or worn ones let the axle shift and dull the feel under braking. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect a difficult job of about 2 hours. No alignment is needed afterward. We also list Front Sway Bar Washer Kit and Front Shock Absorber Upper Bushing (Koni Shocks Only) for the Bronco.
Features
- Install guide: Instructions for fitting are packed in the box.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Bushing material: The bushing material is polyurethane, a firmer choice than rubber.
Specifications
| Part Number | W83484 |
| Part Name | Leading Arm Bushings |
| Vehicle | 1980-1990 Ford Bronco |
| Drivetrain | 4WD |
| Chassis Code | U15 |
| Bushing Color | Black |
| Bushing Inside Diameter | 22.8 mm |
| Bushing Length | 49.7 mm |
| Bushing Material | Polyurethane |
| Bushing Outside Diameter | 66.4 mm |
| Bushing Quantity | 4 |
| Durometer | 85 |
| Grade Type | Regular |
| Hardware Included | No |
| Installation Difficulty | Difficult |
| Installation Time (hrs) | 2 |
| Kit Contents | 4 Bushings, 2 Tubes, Grease |
| Material | Polyurethane |
| Vehicle Placement | Front |
| Wheel Alignment Required | No |
| Notes | - |

