Product Details
This Whiteline Front Gearbox Mount Bushing fits the 2010-2013 Subaru Forester XT Premium (SH). Placement: front. You receive 1 insert bushing. The part number is KDT956.
The transmission is held in the chassis by a mount that absorbs vibration. A soft or worn mount lets the gearbox rock when you shift or get on and off the throttle, which feels like a jerk, a clunk, or a delay. A firmer mount or bushing limits that motion. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 1 hour. A wheel alignment is not required. Whiteline's note for this fit: Inserts: suits 5 speed manual models, installs into voiding of original rear gearbox mount, positive gearbox location. To go with it on the Forester, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Adjustable Sway Bar Vehicle Link Kit.
Features
- Insert design: The inserts work with the original factory bushing instead of replacing it.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing material: Polyurethane bushings flex far less than rubber ones.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | KDT956 |
| Part Name | Gearbox Mount Bushing |
| Vehicle | 2010-2013 Subaru Forester XT Premium |
| Chassis Code | SH |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 72 |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 1 Insert Bushing |
| Material | Polyurethane |
| Wheel Alignment Required | No |
| Notes | Inserts - suits 5 speed manual models - installs into voiding of original rear gearbox mount - positive gearbox location |




