Product Details
This Whiteline Front Gearbox Mount Bushing fits the 2005-2009 Subaru Outback XT Limited (BP/BR). Placement: front. The part number is KDT956. In the box: 1 insert bushing.
Every shift and every throttle change sends torque through the gearbox, and the mount decides how far it can move. Reducing that movement keeps the shifter and driveline more consistent and takes some of the slop out of the car's response. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline's note for this fit: Inserts: suits 5 speed manual models, installs into voiding of original rear gearbox mount, positive gearbox location. Expect a moderate job of about 1 hour. A wheel alignment is not required. We also list Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit for the Outback.
Features
- Insert design: Designed to fit with the factory bushing in place.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
- Bonded design: The bushing is bonded for strength where loads are highest.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | KDT956 |
| Part Name | Gearbox Mount Bushing |
| Vehicle | 2005-2009 Subaru Outback XT Limited |
| Chassis Code | BP/BR |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 72 |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 1 Insert Bushing |
| Material | Polyurethane |
| Wheel Alignment Required | No |
| Notes | Inserts - suits 5 speed manual models - installs into voiding of original rear gearbox mount - positive gearbox location |




