Product Details
This Whiteline Front Gearbox Mount Bushing fits the 2001-2003 Subaru Outback VDC (BE/BH). Included: 1 insert bushing. It goes on the front of the vehicle. Part number KDT956.
The transmission is held in the chassis by a mount that absorbs vibration. A soft or worn mount lets the gearbox rock when you shift or get on and off the throttle, which feels like a jerk, a clunk, or a delay. A firmer mount or bushing limits that motion. Polyurethane resists deflection far better than the soft rubber it replaces.
Whiteline rates the install as moderate and lists about 1 hour. It does not require a wheel alignment. Whiteline's note for this fit: Inserts: suits 5 speed manual models, installs into voiding of original rear gearbox mount, positive gearbox location. To go with it on the Outback, see Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front Steering Rack And Pinion Mount Bushing.
Features
- Insert design: The inserts go into the original bushing rather than replacing it.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bushing material: Made of polyurethane, which resists deflection better than soft rubber.
Specifications
| Part Number | KDT956 |
| Part Name | Gearbox Mount Bushing |
| Vehicle | 2001-2003 Subaru Outback VDC |
| Drivetrain | AWD |
| Chassis Code | BE/BH |
| Bushing Color | Black |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 72 |
| Grade Type | Performance |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 1 Insert Bushing |
| Material | Polyurethane |
| Wheel Alignment Required | No |
| Notes | Inserts - suits 5 speed manual models - installs into voiding of original rear gearbox mount - positive gearbox location |



