Product Details
This Whiteline Front Gearbox Linkage Selector Bushing Kit fits the 2007 Subaru Outback 2.5i Basic (BR). In the box: 3 bushings, 3 tubes, an install guide, and grease. The part number is KDT957. Position: front. Whiteline's note for this fit: Suits manual 5 speed models only.
A manual shift is a mechanical message passing through several joints. Every bit of play in a joint delays the message, and the bushings at the selector are common culprits. Replacing them with firmer ones tightens the whole path. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 1 hour of work listed. A wheel alignment is not required. Other Whiteline parts we list for the Outback: Adjustable Rear Sway Bar Link, 14mm Adjustable Front Camber Bolts, and Front and Rear Sway Bar Kit.
Features
- DIY friendly: A straightforward bolt-on job for a home mechanic.
- Warranty: Covered by a warranty that Whiteline lists at 3 years and 60,000 miles.
- Shift feel: Aims for sharper shifts and less bushing grab or stiction at the mount.
- Polyurethane bushings: Polyurethane bushings keep movement down for a firm ride.
Specifications
| Part Number | KDT957 |
| Part Name | Linkage Selector Bushing |
| Vehicle | 2007 Subaru Outback 2.5i Basic |
| Chassis Code | BR |
| Bushing Material | Polyurethane |
| Color | Black |
| Durometer | 85 |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 1 |
| Kit Contents | 3 Bushings, 3 Tubes, Install Guide, Grease |
| Material | Polyurethane |
| Wheel Alignment Required | No |
| Notes | Suits manual 5 speed models only |




