Product Details
This Whiteline Front Upper Control Arm Bushing Kit (Standard Repl.) fits the 1990-1996 Infiniti Q45 Base (G50). In the box: 8 bushings, 4 shells, and 4 tubes. Whiteline part number: W51219A. Position: front. Application note: Standard Replacement.
When a control arm bushing fails, the wheel is no longer held where it should be under braking and over bumps. This is a like-for-like replacement: it restores the original pivot behavior and ride comfort rather than changing them.
Whiteline rates the install as moderate and lists about 5 hours. Get the car aligned once it is back on the ground. To go with it on the Infiniti Q45, see Rear Differential Mount Support Front Bushing.
Features
- Finish: A powder coated finish resists corrosion and wear.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Install guide: Step-by-step installation instructions come with it.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Material: Built from polyurethane.
Specifications
| Part Number | W51219A |
| Part Name | Control Arm Bushing |
| Vehicle | 1990-1996 Infiniti Q45 Base |
| Chassis Code | G50 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 30 mm |
| Bushing 2 Inner Diameter | 12.2 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 5 |
| Kit Contents | 8 Bushings, 4 Shells, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Standard Replacement |




