Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2015 Mazda MX-5 Miata 25th Anniversary Edition (ND). Part number KCA421. In the box: 4 bushings and 4 tubes. Placement: front. Whiteline's note for this fit: Adds 0.5 degrees Camber.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground. To go with it on the MX-5 Miata, see Front and Rear Sway Bar Kit, Rear Sway Bar Link, and Rear Lower Trailing Arm Bushing.
Features
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Finish: The metal is powder coated, which resists corrosion and wear.
- Grease: Moly grease is supplied to prolong the life of the parts.
- Material: Made from polyurethane.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
Specifications
| Part Number | KCA421 |
| Part Name | Control Arm Bushing |
| Vehicle | 2015 Mazda MX-5 Miata 25th Anniversary Edition |
| Drivetrain | RWD |
| Chassis Code | ND |
| Bushing 1 Inner Diameter | 12.5 mm |
| Bushing 1 Outer Diameter | 33.1 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 10.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 33.1 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


