Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2008-2009 Honda S2000 CR (AP2). This part is for the front of the vehicle. Included: 8 bushings and 4 tubes. Part number W53500.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. To go with it on the S2000, see Adjustable Rear Sway Bar Link, Adjustable Front Sway Bar Link, and Tie Rod Boot Kit.
Features
- Material: Polyurethane construction.
- Easy to fit: Made with the installer in mind, so it goes in without special equipment.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W53500 |
| Part Name | Control Arm Bushing |
| Vehicle | 2008-2009 Honda S2000 CR (AP2) |
| Chassis Code | AP2 |
| Bushing 1 Inner Diameter | 12.2 mm |
| Bushing 1 Outer Diameter | 35.1 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Regular |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 8 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



