Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2007-2008 Audi RS 4 Base (B7). Included: 4 shell bushings and 4 tubes. The part number is KCA420. Whiteline's note for this fit: Adds 0.5 degrees Camber. This part is for the front of the vehicle.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. We also list 16mm Rear Sway Bar Bushing Kit for the RS 4.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: Polyurethane construction.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Bonded design: Bonding adds durability in high-load use.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Grease: Molybdenum disulfide grease is included to help the parts last.
Specifications
| Part Number | KCA420 |
| Part Name | Control Arm Bushing |
| Vehicle | 2007-2008 Audi RS 4 Base |
| Chassis Code | B7 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 46.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 46.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


