Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2004-2009 Audi S4 Cabriolet (B6/B7). Chassis code: B6/B7. It goes on the front of the vehicle. Whiteline part number: KCA420. The kit contains 4 shell bushings and 4 tubes. Whiteline's note for this fit: Adds 0.5 degrees Camber.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Expect a moderate job of about 3 hours. Get the car aligned once it is back on the ground. We also list 16mm Rear Sway Bar Bushing Kit for the Audi S4.
Features
- Camber adjustment: Designed to optimize camber alignment and offset the effect of body roll and tire roll in corners.
- Material: Built from polyurethane.
- Corrosion protection: Metal parts are plated to resist rust over the long term.
- Grease: Molybdenum disulfide grease comes with it for a longer service life.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Bonded design: The bushing is bonded for strength where loads are highest.
Specifications
| Part Number | KCA420 |
| Part Name | Control Arm Bushing |
| Vehicle | 2004-2009 Audi S4 Cabriolet |
| Chassis Code | B6/B7 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 46.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 46.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


