Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 2003-2005 Audi A4 Cabriolet (B6/B7). Part number KCA420. This part is for the front of the vehicle. Application note: Adds 0.5 degrees Camber. The kit contains 4 shell bushings and 4 tubes.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Whiteline rates the install as moderate and lists about 3 hours. Get the car aligned once it is back on the ground.
Features
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
- Material: The part is made of polyurethane.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
Specifications
| Part Number | KCA420 |
| Part Name | Control Arm Bushing |
| Vehicle | 2003-2005 Audi A4 Cabriolet |
| Chassis Code | B6/B7 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 46.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 46.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |



