Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 1998 Audi A4 Avant (B5). Whiteline's note for this fit: Adds 0.5 degrees Camber. Whiteline part number: KCA420. In the box: 4 shell bushings and 4 tubes. Position: front.
Camber is the sideways lean of the wheel when viewed from the front. An offset control arm bushing places the pivot slightly off-center, which shifts the wheel's camber by a small, fixed amount without replacing the arm. On a lowered car that is often enough to bring the tires back toward an even footprint.
Whiteline rates the install as moderate and lists about 3 hours. An alignment is required after installation. To go with it on the Audi A4, see 16mm Rear Sway Bar Bushing Kit.
Features
- Bonded design: The bushing is bonded for extra strength under heavy loads.
- Material: Made from polyurethane.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | KCA420 |
| Part Name | Control Arm Bushing |
| Vehicle | 1998 Audi A4 Avant |
| Chassis Code | B5 |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 46.2 mm |
| Bushing Quantity | 4 Shell Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Shell Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 46.2 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5Degree Camber |


