Product Details
This Whiteline Front Upper Control Arm - Bushing Double Offset Camber Kit fits the 1993-1996 Infiniti Q45 A, (G50). Whiteline's note for this fit: Adds 0.5 degrees. Position: front. Included: 8 bushings, 4 shells, and 4 tubes. Whiteline part number: KCA336.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Installation is rated moderate, with about 4 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Infiniti Q45, see Front Strut Rod to Chassis Bushing Kit and Rear Differential Mount Support Front Bushing.
Features
- Self-lubricating: The bushing carries its own grease supply in internal reservoirs, so it keeps moving freely.
- Corrosion protection: A protective plating covers the metal components to guard against corrosion.
- Finish: Powder coat finish guards the metal against chips and corrosion.
- Material: Polyurethane construction.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
- Install guide: Written install instructions are included with the part.
Specifications
| Part Number | KCA336 |
| Part Name | Control Arm Bushing Kit |
| Vehicle | 1993-1996 Infiniti Q45 A, |
| Chassis Code | G50 |
| Bushing 1 Inner Diameter | 12.6 mm |
| Bushing 1 Outer Diameter | 30 mm |
| Bushing 2 Inner Diameter | 10 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Performance |
| Inside Diameter | 17.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 8 Bushings, 4 Shells, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 30 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Degrees |



