Product Details
This Whiteline Front Upper Control Arm - Bushing Double Offset Camber Kit fits the 1990-1996 Nissan 300ZX 2+2, Base, Turbo (Z32). Included: 8 bushings, 4 shells, and 4 tubes. Part number KCA336. Placement: front. Application note: Adds 0.5 degrees.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Whiteline rates the install as moderate and lists about 4 hours. Get the car aligned once it is back on the ground. To go with it on the 300ZX, see Front Strut Rod to Chassis Bushing Kit, Rear Lower Shock Absorber Bushing, and Rear Sway Bar Link Bushing (21mm OD).
Features
- Install guide: Whiteline packs an install guide with it.
- Finish: Powder coating covers the metal for protection against chips and rust.
- Material: Polyurethane construction.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | KCA336 |
| Part Name | Control Arm Bushing Kit |
| Vehicle | 1990-1996 Nissan 300ZX 2+2, Base, Turbo |
| Chassis Code | Z32 |
| Bushing 1 Inner Diameter | 12.6 mm |
| Bushing 1 Outer Diameter | 30 mm |
| Bushing 2 Inner Diameter | 10 mm |
| Bushing Quantity | 8 Bushings |
| Grade Type | Performance |
| Inside Diameter | 17.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 4 |
| Kit Contents | 8 Bushings, 4 Shells, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 30 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | Adds 0.5 Degrees |



