Product Details
This Whiteline Front Upper Control Arm Bushing Kit fits the 1989-1991 Honda CR-X Base (EF). Whiteline part number: KCA378. You receive 4 bushings and 4 tubes. Placement: front.
Bushings work out of sight, but they decide how well a suspension holds its geometry. A soft or tired control arm bushing allows play that shows up as vague steering, a wandering feel under braking, or a clunk over bumps. Fitting a firmer one takes that slack out. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated moderate, with about 3 hours of work listed. Get the car aligned once it is back on the ground. Other Whiteline parts we list for the CR-X: Adjustable Rear Upper Control Arm Set, Front Sway Bar Link Kit, and Front Sway Bar Link Bushing (28.5mm OD).
Features
- Corrosion protection: Rust protection comes from plating on the metal parts.
- Camber adjustment: Helps keep camber in range so the tire holds its footprint through a corner.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Material: Polyurethane construction.
- Bushing compound: The elastomer formulation is chosen to shrug off oil, grease, ozone, and the elements.
- Grease: Supplied with molybdenum disulfide grease for extended service life.
Specifications
| Part Number | KCA378 |
| Part Name | Control Arm Bushing |
| Vehicle | 1989-1991 Honda CR-X Base |
| Chassis Code | EF |
| Bushing 1 Inner Diameter | 10.2 mm |
| Bushing 1 Outer Diameter | 34.4 mm |
| Bushing Quantity | 4 Bushings |
| Grade Type | Performance |
| Inside Diameter | 12.2 mm |
| Installation Difficulty | Moderate |
| Installation Time (hrs) | 3 |
| Kit Contents | 4 Bushings, 4 Tubes |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 34.4 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | 34mm OD bushing adds 1.0 Degrees |


