Product Details
This Whiteline Front Control Arm Lower Outer Bushing fits the 1991-1993 Ford Festiva GL, L (WD21). Order it as part number W21082. Position: front. In the box: 4 bushings.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Installation is rated easy, with about 1.5 hours of work listed. Plan on a wheel alignment afterward. To go with it on the Festiva, see 12mm Adjustable Front Camber Bolts.
Features
- Material: Polyurethane construction.
- Self-lubricating: Internal grease reservoirs keep the bushing lubricated as it works.
- Bushing compound: A synthetic elastomer compound resists oil, grease, ozone, and weathering.
Specifications
| Part Number | W21082 |
| Part Name | Control Arm Bushing |
| Vehicle | 1991-1993 Ford Festiva GL, L |
| Chassis Code | WD21 |
| Bushing 1 Inner Diameter | 17 mm |
| Bushing 1 Length | 23 mm |
| Bushing 1 Outer Diameter | 27.5 mm |
| Bushing 2 Inner Diameter | 17 mm |
| Bushing 2 Length | 23 mm |
| Bushing 2 Outer Diameter | 27.5 mm |
| Bushing Quantity | 4 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 17 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 4 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 27.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



