Product Details
This Whiteline Front Control Arm Lower Outer Bushing fits the 1977 Mazda GLC LX (FA4). Included: 4 bushings. Placement: front. Whiteline part number: W21082.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. The polyurethane used here deflects much less than the original rubber under the same load.
Expect an easy job of about 1.5 hours. An alignment is required after installation.
Features
- Material: Made from polyurethane.
- Self-lubricating: Built-in grease reservoirs provide continual lubrication and reduce friction.
- Bushing compound: Oil, grease, ozone, and weather do not break down the synthetic elastomer used in the bushings.
Specifications
| Part Number | W21082 |
| Part Name | Control Arm Bushing |
| Vehicle | 1977 Mazda GLC LX |
| Chassis Code | FA4 |
| Bushing 1 Inner Diameter | 17 mm |
| Bushing 1 Length | 23 mm |
| Bushing 1 Outer Diameter | 27.5 mm |
| Bushing 2 Inner Diameter | 17 mm |
| Bushing 2 Length | 23 mm |
| Bushing 2 Outer Diameter | 27.5 mm |
| Bushing Quantity | 4 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 17 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 4 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 27.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



