Product Details
This Whiteline Front Control Arm Lower Outer Bushing fits the 1977-1978 Mazda RX-3 SP (S102A). Included: 4 bushings. Order it as part number W21082. This part is for the front of the vehicle.
A control arm bushing is the pivot where the arm joins the chassis or the wheel carrier. Factory rubber is chosen for quiet and comfort, so it squashes under braking, acceleration, and cornering and lets the arm move more than it should. A firmer replacement keeps the arm where it belongs, which steadies the alignment and gives the car a more consistent feel. Polyurethane resists deflection far better than the soft rubber it replaces.
Expect an easy job of about 1.5 hours. Get the car aligned once it is back on the ground.
Features
- Material: Built from polyurethane.
- Self-lubricating: Grease reservoirs inside the bushing feed lubrication as it moves.
- Bushing compound: The bushing material stands up to oil, grease, ozone, and weather.
Specifications
| Part Number | W21082 |
| Part Name | Control Arm Bushing |
| Vehicle | 1977-1978 Mazda RX-3 SP |
| Chassis Code | S102A |
| Bushing 1 Inner Diameter | 17 mm |
| Bushing 1 Length | 23 mm |
| Bushing 1 Outer Diameter | 27.5 mm |
| Bushing 2 Inner Diameter | 17 mm |
| Bushing 2 Length | 23 mm |
| Bushing 2 Outer Diameter | 27.5 mm |
| Bushing Quantity | 4 |
| Grade Type | Regular |
| Grease Fitting Included | No |
| Inside Diameter | 17 mm |
| Installation Difficulty | Easy |
| Installation Time (hrs) | 1.5 |
| Kit Contents | 4 Bushings |
| Material | Polyurethane |
| Mounting Hardware Included | No |
| Outside Diameter | 27.5 mm |
| Vehicle Placement | Front |
| Wheel Alignment Required | Yes |
| Notes | - |



